COMPLETE CONSTRUCTION OF 10K 12k 14k 18k GOLD CUBAN LINK CHAIN IN 2022

10k Gold Cuban link chains are quite the symbol of wealth, even in the high-end fashion industry.  A 10k gold Cuban link chain is approximately $22,000 in value. A single chain requires the expertise of more than 5 seasoned jewelers, which can take up to 12 hours to complete. So, how are the 10k gold Cuban link chains created? And why are they so costly?

What Is The Process Of Transforming A 10k Gold Cuban Link Chain?

The practice is extensive, involving the crushing of gold, where a significant portion of it tumbles, but this is not wasted and is instead utilized to create other materials or fill up holes. A goldsmith works hard to create an appealing chain that can be sold on the global market.

The gold must meet the expected quantity and weight specifications to succeed commercially. Consumers need to understand the process of gold before combining it with other materials to make a chain. Recognizing how a goldsmith makes a 10k gold Cuban link chain is critical for every user and viewer because they will treat the merchandise respectfully.

How Is It Mixed With Other Alloys?

Putting in other metals, such as alloys, strengthens the gold and increases its endurance and life span. After combining gold with some other metals, it is melted and sculpted into various designs depending on the product the goldsmith wishes to create.

The gold is taken through the karat - scale. "Karat (K)" refers to gold and is a unit of pureness found in real gold. As a result, using 10karat gold to make a 10k gold Cuban link chain is impractical because it is too delicate and quickly wears out over time, even with normal wear.

How Do You Melt And Pour To Make The 10k Gold Cuban Link Chain?

The mixture is then melted with a propane torch after incorporating the required quantity of 10 Karat gold with the appropriate metals. The liquid gold is then poured onto the cast iron by the goldsmith. Mold measurements are typically conventional, making them suitable for use based on chain measurements. The process produces bars that link together to form chains, as the first bar is morphed into a wire. It is only through expertise and the provision of strategic skills that one can understand how a goldsmith produces a 10karat gold Cuban link chain during the melting of the gold. The melting of gold should occur at an accurate temperature to prevent spoiling it.

What Is The Stretching Of The Gold Wire Process?

The gold bar produced in the previous step must be stretched and compressed using various automated rolling mills until it reaches the wire shape required to create the chain links. This time-consuming operation necessitates multiple passes into the rolling mills to correctly stretch the wire to the specified length. Rolling mills are often used to round the wire's edges into a square shape, which is then fed into various holes to speed up the rounding procedure.

What Is Rolling And Cutting The Links?

The gold wire is formed into a metal bar based on the size of the gold Cuban link chain, but the procedure is repeated until the goldsmiths achieve the proper diameter to construct a coil. Furthermore, since the method is manual, it needs the strength of two goldsmiths due to the numerous muscle stretches involved. The coil is cut straight with a special saw, separated from the individual links, and cleaned. To make thick chains, thick wires are required - the kind that is difficult to bend. The heating procedure continues as the gold is mixed with the alloys, particularly when the coil is heated with a torch.

What Is The Soldering And Then Twisting Of The 10k Gold Cuban Link Chain?

Since each link is intimately connected, it solders the gold at the cut point with gold solder. After putting every chain link together, the chain is placed in an industrial twisting machine, which twists one end of the chain while firmly holding the other. This procedure aims to organize the links in the same way. The chain is aneled 2 times with a torch to aid in quickly warping the links, and then the ultrasound solution is used to clean it.

What Is The Filling Of The Flattened Links?

Since the links are circular, the gold obtained at the end of the preceding process is much denser than the predicted weight. It goes through the filling phase to eliminate excess weight, resulting in a flat design and, more specifically, the 10k gold Cuban link chain.

Before beginning the filing process, the chain is secured to the wooden board. Following that, the labor involving procedure for filling begins. The goldsmith must be cautious here because these are the final stages of creating the 10k gold Cuban link chain. Furthermore, all sides of the chain must be fixed on the board to ensure proper work efficiency, and filling should occur evenly.

What Is The Polishing Of The Chain With The Final Weighing In?

The final step in making a gold Cuban link chain is polishing the chain. One of the ends of the chains is cut, leaving the slice open to be linked to the opposite side of the chain. The chain's ends are connected, snipped, and polished before immersing in the electroplating solution. It is worth noting that most clients who purchase Cuban link chains prefer those polished solid gold (not electroplated).

Any Electroplating at all would make the chain a "PLATED CHAIN" no matter what the base metal is. 

 Solid Silver chains are gold plated this would be a better quality base metal (925 sterling silver, with real gold plating).

Others like it when it is electroplated in 18k or above. As a result, electroplating is entirely dependent on the client's requests. The gold chain is weighed on a credentialed scale to determine its estimated weight in grams.

KEY TAKEAWAY!

Styling jewelry is all about one's style. Even a versatile chain can become a high fashion as long as it is worn in moderation. Those searching for 10k gold Cuban link chains are about to make the best call, as many of them are on the market. Because of the various likes and dislikes of the people wearing them, these chains are available in a wide variety. The 10k gold Cuban link chain requires years of experience in manufacturing and distributing because this procedure is time-consuming and risky. The crew uses 1,000-degree wild flames to melt the gold and shape it into a bar.

So, when you see the high prices on these 10K gold Cuban link chains, you will notice the most intricate handmade details and hard work that make the chain all the more unique and worth it.

If you're looking for contemporary designed jewelry options, browse through our extensive collection at Daddy's Chainz.

Meta Description: 10k gold Cuban link chains are prevalent in today's fashion. These renowned chains are usually expensive because of their long production process and hours of manual labor invested. Extensive hours are spent running the hot metal through the machinery before turning it by hand, filing it by hand, and polishing it by hand to create and intricately link these 10k 12k 14k 18k gold Cuban link chains.